The MEGA 200 PRO is a 200-watt, 24-volt rigid solar panel designed for off-grid homes, RVs, trailers, cabins, boats, motorhomes, sheds, DIY solar projects, and larger solar arrays. Its higher-voltage design can reduce the number of panels and connection points required in systems operating above 12 volts. N-Type TOPCon cells, a multi-busbar design, and high-transmission AR-coated tempered glass support efficient sunlight capture and stable production during cloudy conditions and lower-light periods. The panel is PID-resistant and fully inspected through electroluminescence testing to help identify microcracks. Pre-drilled mounting holes, solar connectors, and pre-attached cables support straightforward installation. The corrosion-resistant anodized aluminum frame and weather-protected electrical components are designed for extended outdoor use.

  • Maximum Power Output: 200W
  • Nominal Voltage: 24V
  • Maximum Cell Efficiency: 25.3%
  • Module Efficiency: 20.2%
  • Positive Power Tolerance: 0 to +5W
  • Maximum Power Voltage: 36.3V
  • Maximum Power Current: 5.51A
  • Open-Circuit Voltage: 43.5V
  • Short-Circuit Current: 5.93A
  • Maximum System Voltage: 1,000 VDC
  • Maximum Series Fuse Rating: 15A
  • Operating Temperature Range: -40F to 185F
  • Nominal Module Operating Temperature: Approximately 113F +/- 3.6F
  • Maximum Power Temperature Coefficient: Approximately -0.194%/F
  • Open-Circuit Voltage Temperature Coefficient: Approximately -0.156%/F
  • Short-Circuit Current Temperature Coefficient: Approximately 0.025%/F
  • Solar Cell Type: N-Type TOPCon
  • Cell Dimensions: 8.3 x 2.8 inches
  • Cell Configuration: 60 cells arranged 3 x 20
  • Glass: Approximately 0.13-inch high-transmission, AR-coated tempered glass
  • Backsheet: White or black, depending on the selected model
  • Connector Type: Solar connectors
  • Frame: Anodized aluminum alloy
  • Junction Box Rating: IP67
  • Solar Connector Rating: IP67
  • Cable Type: No. 12-gauge photovoltaic cable
  • Cable Length: 35.4 inches
  • Number of Pre-Drilled Mounting Holes: 14
  • Weight: 24 lb
  • Positive Load Capacity: 5,400 Pa
  • Negative Load Capacity: 2,400 Pa
  • Certifications: UL 61730, IEC 61215, and CSA C22.2

Size Guide

  • Overall Dimensions: 58.7 x 26.8 x 1.2 inches
  • Dimensional Tolerance: Actual dimensions may vary by +/-0.1 inch

Compatibility

Compatible With: PWM and MPPT charge controllers, on-grid and off-grid inverters, mainstream optimizers, inverters, and mounting systems

Connection Configurations: Series and parallel configurations

Supported Mounting Options: Z-brackets, tilt mounts, pole mounts, and ground installations

Suitable Applications: Off-grid homes, RVs, trailers, motorhomes, boats, cabins, sheds, DIY solar systems, mobile installations, and large solar arrays

  • UL Certification

  • High-Voltage Design: For systems operating above 12 volts, one high-voltage panel can replace two standard panels, reducing wiring complexity and connection points.
  • N-Type TOPCon Cells: Multi-busbar cell technology improves light trapping, reduces series resistance, and enhances current collection.
  • Low-Light Performance: Designed to maintain stable electricity generation during cloudy conditions and lower-light periods such as early mornings and evenings.
  • Positive Power Tolerance: A 0 to +5W power tolerance helps ensure at least the rated power output.
  • Tempered Glass: High-transmission, AR-coated tempered glass supports sunlight capture and outdoor durability.
  • PID Resistance: Advanced cell processing and module material control help resist potential-induced degradation.
  • Electroluminescence Inspection: Fully EL-inspected to help detect microcracks and support module integrity.
  • Extensive Testing: Tested for UV exposure, thermal cycling, humidity freeze, high-frequency exposure, and other environmental conditions.
  • Mechanical Strength: Certified to withstand positive loads up to 5,400 Pa and negative loads up to 2,400 Pa.
  • Weather-Protected Components: The sealed junction box and solar connectors carry an IP67 rating.
  • Flexible Mounting: Fourteen pre-drilled mounting holes support Z-brackets, tilt mounts, pole mounts, and ground installations.
  • Plug-and-Play Connections: Pre-attached panel leads and solar connectors support straightforward installation and connection to other panels.
  • Corrosion-Resistant Frame: Lightweight anodized aluminum construction provides strength and resistance to corrosion.
  • Environmental Durability: Designed to withstand exposure to salt, ammonia, sand, elevated temperatures, and high humidity.

N-Type Cells for Higher Efficiency

and Longevity

  • Higher Efficiency: N-Type TopCon cells deliver up to 24.8% conversion efficiency, maximizing power output.
  • Better Low-Light Performance: Stable electricity generation even on cloudy days or during early mornings.
  • Long Lifespan & Ultra-Low Degradation: Grade A+ quality ensures consistent performance and a 25-year power warranty.

Customers also bought

    Frequently Asked Questions

    • FREE SHIPPING IN USA

      Free shipping with every order

    • SATISFACTION GUARANTEED 

      If your order arrives defective or fails to

      function properly, you will receive a full 100% refund!

    • PREMIUM CUSTOMER SUPPORT

      Connect with us through live chat, email, or

      phone, and we will address any questions you may have!

    • SECURE ENCRYPTED PAYMENTS

      We utilize advanced encryption to

      ensure there is never an issue with your privacy.

    Frequently Bought Together

    Total price$25,929.95